Overview

The Configuration menu allows authorized users to modify system settings. These settings may include remote input voltage selection, brightness step configuration, communication parameters, and calibration functions. Changes made in the Configuration menu directly affect CCR operation.

Access Procedure

Ensure the CCR is powered. From the main screen, press CONFIG. When prompted, enter the password: 9999. Press ENTER to access the Configuration menu. If the password is entered incorrectly, access will be denied.

Navigating the Menu

Within the Configuration menu, use navigation keys to scroll through settings. Select the desired parameter. Modify the setting as required. Save changes before exiting. Failure to save may result in lost changes.

Common Configuration Items

Typical configurable items include remote input voltage (24V or 120V), brightness step count (3-step or 5-step), communication settings, and calibration options. Available parameters may vary by model and firmware.

After Making Changes

After modifying settings, return to the main screen. Verify correct operation. Test affected functions (remote control, step selection, etc.). Improper configuration may cause unexpected behavior.

Restricted Access

Configuration access is password-protected to prevent unauthorized changes. Only trained personnel should modify configuration settings.

Safety Reminder

Configuration changes may alter CCR behavior. Ensure the series circuit is safe before changing operational parameters.

Airport Lighting Company | Type L-828, Type L-829 Ferroresonant Constant Current Regulator