Loading
×Sorry to interrupt
CSS Error
Refresh
Skip to Main Content
  • ""
Home Self Help Contact Us

Title
CCR Warning – Low Input Voltage
URL Name
CCR-Warning-Low-Input-Voltage
Summary
Describes the Low Input Voltage warning in the Type L-828 and Type L-829 Ferroresonant Constant Current Regulator and the corrective actions.

Content

Warning Description


The voltage input that feeds the CCR is lower than expected. This alarm defaults at 5% under nominal input voltage. When the CCR determines a warning or setpoint alarm, it will engage the indicator light and the warning will be shown on line 1 of the CCR display. The CCR will continue to operate in the event of a warning. Although the CCR will continue operating, warning conditions must still be noted and fixed. Allowing the CCR to operate in a warning state may cause problems for efficiency, general safety, and longevity of equipment.

Attempt to Correct


Always maintain safe working conditions by using appropriate personal protective equipment (PPE) where necessary.
Check the input voltage calibration: refer to How to Determine if Recalibration is Needed.
If the calibration is correct, consult an electrician to diagnose building power problems.

Airport Lighting Company | Type L-828, Type L-829 Ferroresonant Constant Current Regulator

Constant Current Regulator

Related Articles

  • CCR Warning – High Input Voltage
    Number of Views43
  • CCR Warning – No Input Voltage
    Number of Views35
  • CCR Fault – No Input Voltage
    Number of Views62
  • CCR Warning – VA Low
    Number of Views34
  • CCR Warning – CSS Input Card Failure
    Number of Views42

Trending Articles

  • Troubleshooting an L849(L) SAL-1030 Runway End Identifier Light (REIL) System
  • Performing Megger Testing for Airfield Lighting Systems
  • L-862(L), L-862E(L) High Intensity LED Runway Light - Installation Instructions
  • Control Transformer – 15VAC and 120VAC Outputs in the CCR
  • CCR Fault – Over Voltage
Powered by Salesforce Logo
Loading
CCR Warning – Low Input Voltage